Special process engineer

Indo US MIM tech Pvt ltd

February 2015 to Actually working here

Special process engineer working in electroplating and painting department. Have faced Nadcap,AS audit and qualified for same.also experienced in production,marketing and quality of products. Aerospace industry developing FAI parts. Expertized in electroplating process like Cadmium,electroless nickel,zinc,zinc nickel etc.also in surface finishes like anodizing,CCC and passivation.

Marketing Executive/production engineer

Sheen electroplaters Pvt ltd

January 2014 to January 2015

Project Development involves understanding customer Plating requirements of Thickness, Finish (Matte or Glossy), Undercoat Requirements, Heat treatments depending on hardness, Additional test requirements like Water Immersion test, Salt Spray test, Hydrogen Embrittlement test, Humidity test if required in detail. Taking into consideration the annual quantity of production, cost of production, manpower and Surface area of plating submitting quotations to the customers after arriving to a price

Graduate Apprentice

Bharat electronics limited

January 2013 to January 2014

Calculating Spectrophometric readings to maintain a record for SPC(Statistical Process Control)
Maintaining viscosity of the paint to a minimum range and analyzing rejections in number.
Making Process Control Charts accordingly.
Other Responsibilities:
Maintaining 5S at workplace.
Handling and Troubeshooting in ETP.
Designing special tools for particular processes.
Performing Chemical Blackening for Stainless Steel Parts.
Analysis of Bath Solutions to check concentration levels

Summer Intern

Hindustan petroleum Corporation limited

June 2011 to July 2011

Fluid Catalytic Cracking (FCC) is the most important conversion process used in petroleum refineries. It is widely used to convert high boiling, high molecular weight hydrocarbon fractions of petroleum crude oils to more valuable gasoline, olefinic gases and other products. In comparison with thermal cracking, fluid catalytic cracking is preferred because it produces more gasoline with a high octane rating and also byproduct gases which are more olefinic.

Chemical engineer

July 2008 to July 2012

Chemical engineer

June 2008 to July 2012

Career Goals

Industries of interest

Areas of interest

Availability to travel and work outside the city

No

Interests and hobbies