Associate Professor

RustamJi Institute of Technology, BSF Academy Tekanpur, Gwalior

July 2013 to January 2014

Teaching and R&D Subject was taught in teaching include microwave engineering, Mobile/Satellite/Optical communication systems, television engineering, radar system, antenna theory. Supervise various projects of UG & PG students. Present interest includes research and teaching in microwave engineering, communication system, microwave antennas, computer aided design of microwave integrated circuit and software development.

Sr. Manager, Research and Development

Syrma Technology Pvt. Ltd.

July 2012 to June 2013

Designing of RFID Tags (LF, HF and UHF), RFID Readers (HF and UHF). RFID Solution. Sensor Based RFID System,... etc

RF Engineering

GENERAL DYNAMICS, C4 SYSTEMS Satcom Technologies

February 2009 to July 2012

I have worked more than 3.5 years as Sr. RF Design Engineering in the General Dynamics. There I was working on electromagnetic solver tools like WaspNet and SolidWorks (HFWorks). I worked on a wide range of projects in Microwave and VSAT Antenna Systems designing like, E-plane Branch Line waveguide type directional coupler, Coupler Load, Bend for E-plane and H-plane, Integration kit for dual polarization feed, Conical Load for circular waveguide testing, Ortho Mode Transducer (OMT), Calibration Kit for ENA, Polarization blade for single pol. feed, Step Transition for WR-75 to WR-90 Conversion, Circular to rectangular transition, C-Band OMT Waffle Filter for C band, Trans Reject filter for C band, Low Ku Band Filter, Rectangular to circular Transitions design, Circular to circular Waveguide Transition. Here I am also design my on tool on MATALB. In this company my Antenna and RF components design frequency range was 1GHz to 85GHz (High Frequency band).

Sr. R & D Engineer

Omnia Technologies Pvt. Ltd.

June 2006 to February 2009

Expertise in Design, Optimization and Testing of RFID Systems. Designed, developed and tested RFID antenna (HF/UHF) with hard/ flexible substrate. These antennas designed and simulated using electromagnetic solver IE3D/ Microwave Office/Sonnet for both of the frequency 13.56MHz and 915MHz. After simulation, fabricated and prototyped the design and finally done optimization and troubleshooting. Expertise with Microwave and RF Test Equipment, worked with RF test and measurement equipment such as, Spectrum analyzer, Oscilloscope, RF Receivers, Signal generators etc. Performing outdoor range measurements of antenna patterns based on the standard site method. Expertise in antenna range measurements for optimizing (tuning) the tag antenna with reader system. Designed microstrip meander line dipole and loop antenna on flexible substrates for maximum wireless power transfer to systems for making the sensor based tags.

Sr. Lecturer

Faculty Of Engineering & Technology

March 2006 to June 2006

Lecturership (Antenna Theory and Radar System)

Research Fellow

Madhav Institute of Technology & Science

June 2005 to March 2006

I worked as Junior Research Fellow (JRF) on Department of Science & Technology project ?Design and Development of Microwave Bootlace Lens for Multiple Beam Forming? in M.I.T.S., Gwalior (M.P.) The multifocal bootlace lens is being used as beam forming network for multibeam array antenna. Equations to design the lens have been derived. Lens designed using different design equation approach have been analyzed using the MATLAB. Performances of the lenses obtained by different design approaches fabricated on PCB plate.

DGM Technical (RFID)

BCIL

Actually working here

PhD. [Electronics & Communication. (Microwave Engineering)]

2006 to 2011

Master of Technology (M.Tech.)

2003 to 2005

Bachelor of Engineering (B.E.)

1999 to 2002

Career Goals

Industries of interest

Areas of interest

Availability to travel and work outside the city

No

Interests and hobbies